Easy Wheel Cleaners

28 11 2012

When it comes to maintaining our models, the most important and routine task is cleaning the rails and wheels. As important as it is, it is a project that nobody really enjoys. What if there was a way to keep your wheels clean while you run your trains? Here is a solution so easy you’ll want to give it try!

These easy-to-make wheel cleaners can be adapted to any type of track, including American Flyer two-rail (you’ll just need one less wire!) All you need is some solid 14 gauge (or similar) wire, and paper towels.


Four wire staples provide an anchor for an easy wheel cleaner.

First, cut four (3 for 2-rail) lengths of wire about 2 inches in length. Make a 90 degree bend about 1/2 inch from each end, forming a “U” shape.

These large staples will go on the outside and in between each of the rails. Drill holes in the roadbed, or your benchwork, between the ties and press the wires into the holes. For fast track, about a 3 tie spacing works well. Be careful not to drill through the bus bar or any electrical connections on the underside of the base. With 14 gauge wire, a 1/16″ drill will provide a perfect fit.

The tops of the wires should be below the tops of the rails. Make sure the wires do not touch any of the rails either.


An ordinary paper towel is an effective cleaning pad.

Now, cut an ordinary paper towel into 1 inch wide by about 3 to 4 inch long strips. Thread the paper towel strip under the wires and over the rails.

As you run your trains, the paper towel will remove a little bit of the dirt from each wheel as it crosses. As the dirt builds, just slide the paper towel a little to the left or right to give a clean pad. When the towel is too dirty or ragged to use, just pull it out and replace it.


To clean your wheels, just run your trains! You can slide the pad over for longer use as it gets dirty.

Simply remove the paper towels when you want to take pictures or video of the layout and the wires will not be very distracting. To make the cleaners a little less conspicuous, you can paint the wires flat black. (Or you could pull them out all together.)

You can put these in multiple locations around your railroad for more effective cleaning. The more you run your trains, the more you’ll clean your wheels. And cleaner wheels mean better running trains. Plus, you’ll find yourself cleaning the rails a little less frequently too.



One response

28 11 2012
keith morton


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: