Freight Car Friday – Eastern Ohio Rails

16 08 2013

If you’re headed to our Customer Service Open House tomorrow in Canfield, Ohio you may want to save a little time for some real train watching as well. Northeastern Ohio is a still a busy railroad area with plenty of Class 1 railroads as well as several local shortlines providing lots of action and variety. Several promising train watching locations can be found within just a few minutes’ drive from our Ohio facility.

Norfolk Southern

roadrailer

A Norfolk Southern Roadrailer train heads east against a summer sunset in Columbiana – just south of our facility. With the long summer days, you can enjoy the open house and still get in plenty of train watching!

Today’s Norfolk Southern has several historic ties to the region. The closest rails to Canfield are both former Pennsylvania Railroad lines acquired through Conrail. Just a few miles south of town you can catch lots of mainline action on the former PRR mainline to Chicago and St. Louis. You’ll see freight cars of just about every type here. Intermodal trains are quite common, including double stacks and Roadrailers. You’ll also catch unit trains of coal, oil and ethanol, stone, autos and occasionally grain. There is frequent mixed freight action coming and going from Conway Yard, not far away across the Pennsylvania line. Amtrak’s Capitol Limited also uses the line but normally passes here in the dark.

hazelton

Traffic at Hazelton Yard in Youngstown still shows lots of cars serving steel industries.

Heading east towards Youngstown, you can also catch Norfolk Southern on the Pennsy’s former Youngstown Line. Traffic here is a little lighter but includes a few daily mixed freights, plenty of coal and ore trains along with empties, as well as local runs serving a variety of industries. Although the steel trade is not what it once was, steel products are still make up many of the loads. Gondola, coil cars and flatcars are most common.

For a completely different look, you can travel a few miles in the opposite direction to the large GM assembly plant in Lordstown. Although the plant is served by Norfolk Southern via a small branch line, most of the traffic is delivered to CSX’s nearby mainline. If you’re looking for big boxcars and autoracks, this is the place.

CSX

csx

One of the many auto trains on CSX heads races east ahead of threatening skies. The small town of Lowelville offers a pleasant place to catch all the action – along with the NS Youngstown Line.

CSX comes through the area on former B&O and P&LE tracks. Part of their mainline west from Philadelphia, Baltimore and Washington D.C., you’ll see a great variety of traffic here too. In the Youngstown area, CSX and the NS Youngstown line are often close by. With the help of a scanner you can easily catch trains on both lines all day. The lines cross at Center Street in Youngstown and the junction is easily and safely viewed from a public overpass.

CSX traffic includes lots of coal, coke, auto and intermodal trains in addition to mixed freights and locals. Lines east of Pittsburgh have clearance restrictions which limit double stacks to pairs of the shorter international containers. Scenery on this line also varies from quaint small towns to wooded hills, to the urban backdrop of Youngstown to open farmland. If you want a different view, it can usually be had in just a few minutes’ drive.

Youngstown and Southeastern

Lionel boxcar

Here’s one you just can’t shoot anywhere else!

Looking for something completely different? The Youngstown and Southeastern offers a chance to watch some first-generation Geeps hauling large unit trash trains down a single-track branch line. The line was originally the Youngstown and Southern, eventually part of the P&LE and handed down through a long string of owners after 1991. Today the line’s primary function is to serve the Total Waste Logistics trash incinerator. Trash cars are interchanged with CSX and NS in Youngstown.

When not in use, the line’s locomotives can usually be found next to the old station in North Lima. While you’re there, make sure to see the Lionel Lines and LGB boxcars!

We hope you’ll all be able to make it to our 3rd annual open house. There are lots of other great train (and non-train) activities in the region too, so make a weekend of it!





Freight Car Friday – Roadrailers

28 09 2012

When is a freight car not a freight car? When it’s a truck. The Roadrailer is a unique intermodal vehicle that is both. These highway trailers / railcars have had a long and interesting story.

Early History

roadrailer

A Norfolk Southern Roadrailer train heads east against a summer sunset in Ohio.

Many think of intermodal and Roadrailer technology as something relatively new. The Chesapeake and Ohio introduced the first Roadrailers on the rear of passenger trains between Detroit and Grand Rapids in 1955. The short, 29′ vans were coupled to the back of the daily trains and carried mail and other less-than-carload traffic. Compared to today, the operation was as diminutive as the equipment but it paved the way for future developments.

The bi-modal concept went into hibernation for over a decade. In 1981, this very week in fact, a new generation of Roadrailers debuted on the Illinois Central Gulf. Like the earlier cars, the trailers carried their own set of railroad wheels and were connected to each other with drawbars. While this arrangement reduced tare weight on the rails vs. a traditional trailer-on-flatcar, on the highway the added weight was a detriment. The mechanics of the equipment were another potential problem as well.

Unlike the original service, these new trailers operated as their own dedicated train. After the Illinois Central, several additional railroads experimented with the concept and equipment through the 1980s. They could even be seen running behind EMD F units on CSX. Although the concept was gaining ground, the limitations of the equipment prevented most of the railroads from going forward with the experiment.

Technology Takes Hold

Triple Crown

Triple Crown’s fleet of roadrailers proved the advantages of the Wabash National design.

By the end of the decade, the Roadrailer would mature and begin to shed its railroad wheels. Wabash National, the leading builder of trailers in the U.S., purchased the technology in 1991 and redesigned the roadrailer to be much more like a conventional trailer. The noticeable difference between a Roadrailer and a road-only trailer are the extra connection pins and an air line for the train airbrakes.

The trailers are attached to railroad bogies, or trucks, in the terminal. A pneumatic suspension system on the trailer raises the body to accept the bogie. Once attached, the road wheels are then drawn up for clearance. Trains are built from the back to the front, one trailer at a time, with a single bogie supporting both the front of one trailer and the rear of another.

couplermate

The “Couplermate” adaptor allows an easy connection to the locomotives. It is the only coupler needed for the entire train.

Once the trailers are connected, the air lines must be connected to the bogies which also hold the brake cylinders. An end-of-train device is put on the rear and a special adapter bogie with a standard knuckle coupler at one end is placed under the front of the first trailer.

Because of the tight connections between the trailers, a train of as many as 125 cars has only six inches of coupler slack. With its light weight and tight connections, a Roadrailer handles much more differently than a conventional train. While in some ways this handling is easier and more advantageous, engineers must still be careful as the structure of the trailers is not nearly as robust as a railcar. A sudden stop or start can tear a trailer in half or crush it like a soda can.

The Modern Era

BNSF

BNSF’s refrigerated Roadrailers now travel on flatcars. Some retain their Roadrailer hardware however.

Thanks to these improvements, Roadrailers saw an explosion of growth in the 1990s. The largest operator then and now is Triple Crown Corporation, owned by Norfolk Southern. Conrail bought a 50% stake in the company in 1993 which returned to NS during the merger in 1999.

There were several more operations springing up across the country. Santa Fe tested five trailers specially adapted for hauling automobiles. Later BNSF ordered a large fleet of refrigerated trailers for service out of the Northwest. Canadian National and trucking companies Schneider National, Clipper and Swift also bought fleets of Roadrailers.

Amtrak

Amtrak’s first group of Roadrailers were only 48′ long and featured sliding side doors. Triple Crown no longer uses the side doors.

Then the technology came full circle as Amtrak purchased new Roadrailers for mail and express shipments. These rode on the rear of passenger trains all across the country.

The golden years were short lived however. Amtrak soon decided that the added delays to passengers more than offset the financial gains from its Roadrailers and other express contracts. All of the other operations except for Triple Crown also fizzled within a few months or years of inception. Many of these Roadrailers were sold to Triple Crown and are still in service. Others can still be spotted riding conventional intermodal trains as trailers.

ex Clipper

Most of the Roadrailers built in the 1990s are serving their final years on Triple Crown trains, like this ex – Clipper trailer.

Triple Crown continues to operate an extensive network across the northeast U.S. serving many automotive suppliers and other industries with the flexible service. In recent months however the company has begun to show a shift to conventional trailers and rumors abound that within a few years it too may cease Roadrailer operations. Just in case, get out there are see them while you can! Who knows if or when the revolution will begin again.